Boiler rules and regulations in Malaysia are covered by the Factories and Machinery Act 1967 (Act 139) and the Factories and Machinery (Steam Boiler and Unfired Pressure Vessel) Regulations 1970. These regulations are enforced by the Department of Occupational Safety and Health (DOSH).
The main objectives of the regulations are to:
- Ensure the safety of persons operating and using boilers and unfired pressure vessels.
- Prevent accidents and injuries caused by boiler and unfired pressure vessel explosions or failures.
- Promote good engineering practices in the design, construction, operation, and maintenance of boilers and unfired pressure vessels.
The regulations cover a wide range of topics, including:
- The design, construction, and testing of boilers and unfired pressure vessels.
- The installation and operation of boilers and unfired pressure vessels.
- The inspection and maintenance of boilers and unfired pressure vessels.
- The qualifications and training of boiler operators and inspectors.
Some of the key requirements of the regulations include:
- All boilers and unfired pressure vessels must be registered with DOSH.
- All boilers and unfired pressure vessels must be inspected and tested by a competent person at regular intervals.
- All boiler operators must be qualified and trained.
- Boilers and unfired pressure vessels must be operated and maintained in a safe manner.
DOSH also publishes a number of guidelines and codes of practice on boiler and unfired pressure vessel safety. These guidelines and codes of practice are not mandatory, but they provide valuable guidance on how to comply with the regulations.
Failure to comply with the boiler rules and regulations can result in serious penalties, including fines and imprisonment.
If you have any questions about the boiler rules and regulations in Malaysia, you should contact DOSH.
No comments:
Post a Comment